Skip to content
LoclisBeta
Sign up
CostLVP & Laminate

How much does LVP flooring cost installed in Virginia?

There is no single Virginia price for installed LVP. The total depends on the plank, the area, the shape of the rooms, the condition of the subfloor and what happens to the old floor. Ask at least three licensed contractors for itemized written bids on the same product and scope, and compare them line by line.

Free to ask. Local shops send quotes, and you pay only when you book one.

By Kasra Taheri, Founder, LoclisPublished

Researched and drafted with AI, then checked claim by claim against the sources listed below before it was published. Prices and rules change; the dates beside each source say when it was last checked.

Step by step

Read when to stop and call a pro, further down this page, before you start.

  1. Step 1: Measure the rooms

    Measure each room and note closets, doorways and cabinet runs, so every contractor bids the same area.

  2. Step 2: Pick the product

    Choose the exact plank by brand and model, and note whether it has an attached underlayment.[1]

  3. Step 3: Write the scope

    List removal of the old floor, subfloor leveling, moisture testing, trim, thresholds and who moves the furniture.

  4. Step 4: Ask for at least three written bids

    DPOR advises soliciting at least three bids for the work, all based on the same set of specifications.[3]

  5. Step 5: Compare line by line

    Check that each bid covers the same tasks, and ask about any bid that is substantially lower than the others.[3]

  6. Step 6: Confirm the licence

    Check the contractor's Virginia licence class suits the size of the job, and look it up with DPOR.[4]

  7. Step 7: Agree on the deposit

    Keep the deposit modest and tie later payments to finished work.[3]

There is no single installed price for LVP in Virginia that holds across jobs, and a per-square-foot figure without a scope tells you little. The total is the plank, the labor to lay it, and everything the job needs first: leveling, moisture work, removing the old floor, trim and cleanup. The dependable way to get a number is to ask several licensed contractors for itemized written bids on the same specification.

What drives the price

The product. Plank thickness, wear layer, rigid or flexible core and a pre-attached underlayment all change the material line. Some products include their own underlayment, and the Malibu guide says that adding more under those planks voids the warranty,[1] so ask whether underlayment is in the price, and which kind.

The subfloor. This is the biggest swing. The manufacturer's guide asks for a subfloor flat within 1/8" over a 6' span, or 3/16" over a 10' span.[1] A floor that misses it needs grinding and patching. Virginia's contractor regulations treat that as part of flooring work: the definition includes installing or replacing subflooring, leveling products and other materials needed to prepare for the new floor, but not floor joists or other structural components.[2]

Moisture. Moisture testing is required,[1] and a concrete slab must be fully cured for at least 60 days and tested.[1] A test, a vapor barrier or a leak repair adds a line to the bid.

Removing the old floor. Carpet comes up quickly. Glued vinyl or tile is slow work. The guide says never to sand and grind materials covered with lead paint, or containing asbestos,[1] so an older floor can add testing and specialist work.

The room. Closets, doorways, cabinet runs and odd angles mean more cuts and waste. Door casings are undercut so the planks slide under,[1] and each opening is time. Trim, thresholds and moving furniture are often separate lines or left out. Ask.

A wood-look laminate plank edge beside a grey foam underlayment on a subfloor
Photo: marsupium photography, CC BY-SA 2.0, via Wikimedia Commons

How to get bids you can compare

Virginia defines flooring and floor covering contracting as the installation, repair, improvement or removal of materials common in the flooring industry, including vinyl and linoleum.[2] DPOR advises that you solicit at least three bids for the work, all based on the same set of specifications.[3]

Give every bidder the same list: the product and color by brand and model, rooms and square footage, underlayment, removal and disposal of the old floor, subfloor repairs, moisture testing, trim and baseboard, and furniture moving.

Then look closely at the outliers. DPOR says a bid substantially lower than the others probably indicates the contractor has made a mistake or is not including all the work quoted by competitors.[3] A higher one may use a better product or cover more.

Ask each bidder how long the job takes, what the workmanship warranty covers, and for their Virginia licence number and class.

Licence and payment

Virginia's Class C contractor licence covers work where the total value of a single contract or project is over $1,000 but less than $30,000; Class B starts at $30,000.[4] Look the licence up with DPOR before you sign.

DPOR's rule of thumb is an initial deposit of no more than 10% of the total price or $1,000, whichever is less, and up to 30% if the job needs custom-made items or special orders.[3] DPOR also says never to let payments get ahead of the contractor's work and not to pay 100% of the bill until the work is 100% complete.[3]

Stop and call a pro if

  • A bid is far below the others and the scope is vague.
  • You are asked to pay most of the price before any work starts.
  • The subfloor is soft, rotted or damp, which may point to a leak or a structural problem.
  • The old flooring might contain asbestos, or the paint might contain lead.
  • The job needs heavy leveling or work on joists or plumbing.

Next steps

If you plan to do the work yourself, read how to install luxury vinyl plank flooring. If you are choosing between materials, see whether vinyl plank or laminate is better for a kitchen. Browse more flooring answers or flooring businesses on Loclis.

To compare quotes, describe your flooring project.

Common questions

Why are LVP quotes so different?
Usually the jobs are not the same. One bid may include removing the old floor, leveling the subfloor, moisture testing and trim, and another may not. DPOR advises basing every bid on the same specifications.
Does a low bid mean a good deal?
Not necessarily. DPOR says a bid substantially lower than the others probably means the contractor made a mistake or left out work the others quoted.
Does the subfloor change the cost?
Yes, often by the most. The manufacturer's guide asks for a subfloor flat within 1/8 inch over 6 feet, or 3/16 inch over 10 feet, so a floor that misses it needs grinding and patching before any plank goes down.
Do I need a licensed contractor for LVP?
Virginia's regulations define flooring contracting to include vinyl, and a Class C licence covers a single contract or project over $1,000 and under $30,000, with Class B starting at $30,000. Look up the contractor's licence with DPOR before you sign.

Sources

  1. [1] Malibu Wide Plank Installation Guidelines for Rigid Core Luxury Vinyl Plank Floors (041922), Malibu Wide Plank, installation guide. Checked October 27, 2026.
  2. [2] 18VAC50-22-30, Definitions of specialty services, Virginia Administrative Code, Board for Contractors. Checked October 27, 2026.
  3. [3] What You Should Know Before You Hire a Contractor, Virginia Board for Contractors, Department of Professional and Occupational Regulation. Checked October 27, 2026.
  4. [4] Va. Code § 54.1-1100, Definitions, Code of Virginia, Virginia General Assembly. Checked October 27, 2026.

Want a pro to handle it?

Describe the job once. Licensed local businesses send quotes, and you pay only when you book one.